TM-9-2350-277-10

CARRIER, M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; OPERATOR’S MANUAL

TM-9-2350-277-10 - Page 546 of 889

TM 9-2350-277-10

TROUBLESHOOTING TABLE — Continued

0089 00

INITIAL SETUP:

Maintenance Level

Operator

BILGE PUMPS

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

1.

BILGE PUMP DOES NOT

WORK WITH THE BILGE

PUMPS SWITCH ON.

1.

Check to see if MASTER SWITCH is OFF.

Turn MASTER SWITCH to ON.

2.

Check to see if bilge pump strainers or

outlets are clogged.

Clean bilge pump strainers or

outlets (WP 0096 00).

3.

Check to see if bilge pump vents are blocked.

Clean bilge pump vents

(WP 0096 00). If you cannot

get to the bilge pump to clean it

because of a load in the personnel

compartment, cycle the BILGE

PUMP switch ON and OFF

(WP 0004 00) a few times. That

will usually start the pump.

0089 00-15/16 blank

Change 5