TM-9-2350-277-10

CARRIER, M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; OPERATOR’S MANUAL

TM-9-2350-277-10 - Page 555 of 889

TM 9-2350-277-10

TROUBLESHOOTING TABLE — Continued

0089 00

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

2.

INVERTERS FAIL TO

POWER-UP OR NO

OUTPUT AC POWER

ON POWER CONTROL

ENCLOSURE METER.

WARNING

HIGH VOLTAGE is used in the

operation of this equipment.

DEATH ON CONTACT may result

if personnel do not observe saftey

precautions.

Never work on equipment unless at least

one other person is nearby, familiar

with the operation and hazards of the

equipment and is familiar with giving

first aid. When an operator helps a

mechanic, that operator must be warned

about dangerous areas.

SHUT OFF POWER supply to

equipment before beginning work.

Make sure all external power os

off/disconnected.

BE CAREFUL not to contact high

voltage connections when installing or

operating this equipment.

1.

Power-down Inverters, follow procedure

(WP 0086 02 or WP 0086 03) prior to

checking for loose connections.

2.

Check to see if MASTER SWITCH is in the

OFF position.

Turn MASTER SWITCH to ON.

0089 00-24

Change 5

3.

Check Power Control Enclosure METER for

output AC power.

If there is no output AC power,

OFF position.

move MASTER SWITCH to the