TM-9-2350-277-20-1
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 6
TM-9-2350-277-20-1 - Page 146 of 855
TM 9-2350-277-20-1
ENGINE OVERHEATS (NEW VSFD CONFIGURATION)
0014 01
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Pipe Bushing, 1/4 OD to 1/8 ID (WP 0926 00, Item 11)
Pipe Plug, 1/8 inch (WP 0926 00, Item 33)
Radiator Test Kit (WP 0926 00, Item 60)
Personnel Required
Mechanic
Helper (H)
Equipment Condition
Engine stopped (TM 9-2350-277-10)
Carrier blocked (TM 9-2350-277-10)
Power plant access door open (TM 9-2350-277-10)
Driver’s power plant access panel removed
(WP 0441 00)
Power plant rear access panels removed (WP 0439 00)
T
1.
Does engine boil over?
TN
1.
Verify proper operation of coolant
TEMP indicator before continuing
(WP 0053 00).
2.
Verify no faults found.
Y
1.
Observe coolant TEMP indicator. See TM 9-2350-277-10.
2.
Does coolant TEMP indicator indicate overheating?
YN
1.
Verify proper operation of coolant
TEMP indicator before continuing
(WP 0053 00).
2.
Verify no faults found.
2Y
1.
Inspect power plant front access door, driver’s access
panel, rear access panel, and bottom access cover seals.
See TM 9-2350-277-10.
2.
Are all parts and seals in good condition?
2YN
1.
Repair and/or adjust faulty parts
and/or seals as required (WP 0439 00
thru WP 0463 00 or WP 0464 00
thru WP 0473 00).
2.
Verify no faults found.
3Y
1.
Inspect power unit coolant hoses, radiator, and fittings for
leaks. See TM9-2350-277-10.
2.
Is power unit free of coolant leaks?
3YN
1.
Repair cooling system leaks
(WP 0229 00).
2.
Verify no faults found.
001401-1
Change 5
Back to Top
