TM-9-2350-277-20-1

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 6

TM-9-2350-277-20-1 - Page 158 of 855

TM 9-2350-277-20-1

ENGINE DOES NOT CRANK — Continued

0016 00

BY

1.

Inspect harness 12349873 circuit 6 (1) and 6A (2) terminal

ends on starter for corrosion and/or damage.

2.

Remove harness 12349873 circuit 6/6A plug (3) from harness

12349881 jack (4) at vehicle bulkhead.

3.

Inspect condition of plug and jack pins.

4.

Are all parts free from corrosion and damage?

BYN

1.

Clean and repair parts as required

(WP 0382 00).

2.

Verify no faults found.

B2Y

1.

Install harness 12349873 circuit 6/6A plug to harness

12349881 jack at vehicle bulkhead.

2.

Perform MSD/ICE test 70 starter solenoid voltage (WP 0127 00).

3.

Does MSD read less than 17 volts?

B2YN

1.

Replace starter assembly

(WP 0259 00).

2.

Verify no faults found.

B3Y

1.

Turn MASTER SWITCH to ON.

2.

Is STEERING LOCKED indicator ON?

B3YN

GO TO

CY

(PAGE 0016 00-7)

001600-3

Change 5