TM 9-2350-277-20-1
ENGINE CRANKS BUT WON’T START BELOW 40
(AIR BOX HEATER IS
USED)—Continued
0022 00
B2Y
1.
Install air box igniter (WP 0207 00).
2.
Remove ignition wire (1).
3.
Measure resistance between wire ends (1) and (2).
4.
Is ignition wire in good condition and measure 0 ohms?
YES
NO
B2YN
1.
Replace igniter wire (WP 0204 00).
2.
Verify no faults found.
B3Y
1.
Install ignition wire on igniter (WP 0204 00).
2.
Remove air box heater harness plug (1) from ignition coil (2).
3.
Depress air box heater switch.
4.
Measure voltage between air box heater harness plug (1) pins
then release switch.
5.
Does multimeter read less than 17 volts with switch depressed?
YES
NO
B3YN
1.
Replace ignition coil (WP 0208 00).
2.
Verify no faults found.
0022 00-6