TM 9-2350-277-20-1
STEERING LOCKED INDICATOR MALFUNCTIONS — Continued
0054 00
AY
1.
Check adjustment of steering locked indicator switch. See
WP 0428 00 for solenoid-activated lock. See WP 0429 00
for cable-activated lock.
2.
Is switch properly adjusted?
AYN
1.
Adjust steering locked switch. See
WP 0428 00 for solenoid-activated
lock. See WP 0429 00 for
cable-activated lock.
2.
Verify no faults found.
A2Y
1.
Replace steering lock switch (WP 0330 00).
2.
Verify no faults found.
BY
1.
Remove STEERING LOCKED indicator light cover lens
(1), gasket (2), bulb (3), and gasket (4).
2.
Check continuity between bulb center contact and base.
3.
Does multimeter indicate continuity?
BYN
1.
Replace STEERING LOCKED
indicator bulb (WP 0294 00).
2.
Verify no faults found.
B2Y
1.
Install STEERING LOCKED indicator cover lens,
bulb, and gaskets.
2.
Inspect distance between steering locked switch (1) and
steering locked lever (2).
3. Issteeringlockedswitchtouchingsteeringlocked lever?
GO TO
CY
(PAGE 0054 00-3)
005400-2
Change 5
B2YN