TM 9-2350-277-20-1
STEERING LOCKED INDICATOR MALFUNCTIONS — Continued
0054 00
C3Y
1.
Install harness 12369685 (for cable-activated lock) plug
on STEERING LOCKED indicator jack.
2.
For solenoid-activated lock, remove harness 12349911 lead 369A
plug (1) and lead 369 plug (2) from steering locked switch
jacks (3) and (4). For cable-activated lock, remove harness
12369684 lead 368 plug (1) and lead 369A plug (2) from
steering locked switch jacks (3) and (4).
3.
H: For solenoid-activated lock, push and hold solenoid
plunger while measuring resistance.
4.
Measure resistance between steering locked switch
jacks (3) and (4).
5.
Does multimeter read 0 ohms?
C3YN
1.
Replace steering locked switch
(WP 0330 00).
2.
Verify no faults found.
C4Y
1.
Replace harness 12349911 (for solenoid-activated lock) circuit
369, 369A, 368, 368A, or harness 12369684 (for cable-activated
lock) circuit 369A and 368, and/or ground (WP 0367 00).
2.
Verify no faults found.
0054 00-5/6 blank
Change 5