TM 9-2350-277-20-1
ENGINE COOLANT LOW LEVEL INDICATOR MALFUNCTIONS — Continued
0058 00
Y
1.
Install ENGINE COOLANT LOW LEVEL indicator
cover, bulb and gaskets.
2.
Remove harness 12349873 plug (1) from coolant level
detector jack (2).
3.
Turn MASTER SWITCH to ON.
4.
Is ENGINE COOLANT LOW LEVEL indicator off?
YN
GO TO
AY
(PAGE 0058 00-3)
2Y
1.
Install jumper wire between harness 12349873 plug
pinBandground
.
2.
Is ENGINE COOLANT LOW LEVEL indicator on?
2YN
GO TO
BY
(PAGE 0058 00-4)
3Y
1.
Remove jumper wire.
2.
Measure voltage between harness 12349873 plug
pinAandground.
3.
Does multimeter read 17 volts or more?
3YN
GO TO
CY
(PAGE 0058 00-5)
4Y
1.
Replace auxiliary tank fluid level detector (WP 0329 00).
2.
Verify no faults found.
005800-2
Change 5