TM 9-2350-277-20-1
TRANS FILTER CLOGGED INDICATOR MALFUNCTIONS
0059 00
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Multimeter (WP 0926 00, Item 30)
Jumper Wire
Personnel Required
Mechanic
Helper (H)
Equipment Condition
Engine stopped (TM 9-2350-277-10)
Carrier blocked (TM 9-2350-277-10)
Power plant access door open (TM 9-2350-277-10)
T
1.
Turn MASTER SWITCH to ON.
2.
Is TRANS FILTER CLOGGED indicator off?
TN
GO TO
AY
(PAGE 0059 00-4)
Y
1.
Remove TRANS FILTER CLOGGED indicator cover lens
(1), gasket (2), bulb (4), and gasket (3).
2.
Check continuity between bulb base and bulb center contact.
3.
Does multimeter indicate continuity?
YN
1.
Replace TRANS FILTER
CLOGGED indicator bulb
(WP 0287 00).
2.
Verify no faults found.
2Y
1.
Measure voltage between indicator assembly center
contact and ground.
2.
Does multimeter read 17 volts or more?
2YN
GO TO
BY
(PAGE 0059 00-6)
005900-1
Change 5