TM-9-2350-277-20-1

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 6

TM-9-2350-277-20-1 - Page 392 of 855

TM 9-2350-277-20-1

TRANSMISSION HIGH TEMP INDICATOR COMES ON — Continued

0072 00

3Y

1.

Stop engine. See TM 9-2350-277-10.

2.

Remove pressure tester, elbow, and install MAIN port plug (1).

3.

Remove plug (2) from FILTER IN port (3).

4.

Remove turbo air inlet duct (4) and trans filter clogged

switch plug (5).

5.

Install 4730-766-9000 elbow (6) into FILTER IN port (3).

6.

Install pressure tester into elbow (6).

7.

Install turbo air inlet duct (4).

8.

Start engine. See TM 9-2350-277-10.

9.

With engine at 600 RPM, measure FILTER IN pressure with

transmission in R, and then in 1-4 position. Pressure should be

280-325 psi in R. Pressure should be 190-210 psi in 1-4 position.

10. Is FILTER IN pressure 35 psi or more greater than MAIN

pressure?

3YN

GO TO

CY

(PAGE 0072 00-4)

4Y

1.

Is TRANS FILTER CLOGGED indicator ON?

4YN

GO TO

DY

(PAGE 0072 00-4)

5Y

1.

Stop engine. See TM 9-2350-277-10.

2.

Replace transmission oil filter element (WP 0398 00).

3.

Verify no faults found.

007200-3

Change 5