TM 9-2350-277-20-1
POWER CONTROL ENCLOSURE A1 DC INPUT/OUTPUT INOPERATIVE (M1068A3
ONLY)—Continued
0090 00
3Y
1.
Set MASTER SWITCH to OFF.
2.
Install cable W6 plug P5 (1) on Power Control Enclosure jack J26
(2).
3.
Set MASTER SWITCH to ON.
4.
Does voltage on DC VOLTS meter (3) on Power Control
Enclosure panel read the same as voltage at carrier batteries?
YES
NO
GO TO
BY
(PAGE 0090 00-11)
4Y
1.
Verify no faults found.
0090 00-5