TM 9-2350-277-20-1
NO POWER FROM DC POWER EXTENSION BOX A9 (ALL EXCEPT JACK J23) (M1068A3
ONLY)—Continued
0095 00
T
1.
Remove cable W10 plug P14 (1) from Power Control Enclosure
jack J34 (2).
2.
Turn MASTER SWITCH to ON.
3.
Set DC LEFT OUTLETS switches (3) on Power Control
Enclosure panel to ON (see TM 11-7010-256-12&P).
4.
Measure voltage between sockets A and B of jack J34 (2). Repeat
measurement for sockets C and D.
5.
Does multimeter read 22 volts DC or more for each
measurement?
YES
NO
GO TO
AY
(PAGE 0095 00-4)
0095 00-2