TM-9-2350-277-20-1
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 6
TM-9-2350-277-20-1 - Page 491 of 855
TM 9-2350-277-20-1
NO POWER FROM DC POWER EXTENSION BOX A9, JACK J23 (JTIDS)
(M1068A3 ONLY) — Continued
0096 00
AY
1.
Turn MASTER SWITCH to OFF (see your -10).
2.
Remove 10 screws (1) and lockwashers (2), and lower
faceplate (3). Discard lockwashers.
3.
Turn ON JTIDS circuit breaker CB11 (4).
4.
Undo velcro strap (5) and lift safety cover (6) over
top of faceplate (3).
5.
Measure resistance between terminals 1 and 2 (7) of
circuit breaker CB11 (4).
6.
Does multimeter read 0 ohms?
AYN
1.
Replace circuit breaker CB11
(WP 0828 00).
2.
Verify no faults found.
A2Y
1.
Place safety cover over inside of faceplate and secure
with velcro strap.
2.
Raise faceplate and secure to power control enclosure with
10 new lockwashers and screws.
3.
Go to Power Control Enclosure A1 DC Input/Output Inoperative
(M1068A3 Only) (WP 0090 00).
009600-4
Change 4
Back to Top
