TM 9-2350-277-20-2
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS), INCLUDING
LUBRICATION INSTRUCTIONS — Continued
0155 00
0155 00-146
Change 5
ITEM
NO.
INTERVAL
MAN-
HOUR
ITEM TO BE
CHECKED OR
SERVICED
CREWMEMBER
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE
IF:
m. Check heater control box, switches, and
light bulb. Tighten or replace bad switches
and bulbs (WP 0702 00).
n.
Start, run, and stop heater. See TM
9-2350-277-10. During start cycle, check
that switches and light work properly.
Check for increase in blower speed after
ignition.
o.
During operation, check for unusual noises.
Check for differences between high and
low heat levels.
p.
When stopping heater, check for correct
purge cycle. Verify that indicator light
operates properly. If heater does not operate
as specified above, perform troubleshooting
(WP 0086 00).