TM 9-2350-277-20-2
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS), INCLUDING
LUBRICATION INSTRUCTIONS — Continued
0155 00
0155 00-148
Change 5
ITEM
NO.
INTERVAL
MAN-
HOUR
ITEM TO BE
CHECKED OR
SERVICED
CREWMEMBER
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE
IF:
99
Semi-
Annual
Turn Signal
Lights, Stoplights,
Blackout
Stoplights,
Dome Lights,
Fluorescent
Lights, and
Switches
a.
Test operation of lights with signal control
in all four operating positions. Repair or
replace damaged or discolored lenses.
Repair or replace defective lights, control,
flasher, and lights.
100
Semi-
Annual
Reflectors
a.
Check reflectors lens. Replace damaged or
missing lens.
101
Semi-
Annual
Electrical Wiring
a.
Tighten electrical connections and
mounting brackets. Tape frayed harness.
Replace missing or damaged connectors.
102
Semi-
Annual
Slave Cable
NOTE
Location varies by model.
a.
Check the slave cable receptacle and cap
for damage, burnt condition, and corrosion.
103
Semi-
Annual
Transmission/
Engine Spline
Drive
a.
Perform M113A3 detection procedures
for wear signs on the transmission/engine
spline drive coupling as follows:
NOTE
Spline drive coupling wear can be
detected in its early stages using
any of the following three inspection
procedures. For best results, use all
three.