TM 9-2350-277-20-2
DRAIN AND FILL COOLING SYSTEM — Continued
0227 00
WARNING
Hot radiator coolant can burn you. Use hand to remove cap ONLY if cool to touch. Turn cap
slowly to release pressure. Replace cap by pressing down and turning until tight.
6.
Add coolant as necessary to bring level to COLD mark of filler neck (1). Check for leaks.
FOLLOW-THROUGH STEPS
1.
Install power plant bottom access cover (WP 0450 00).
2.
Install power plant lower rear access panel (see your -10).
END OF TASK
0227 00-5/6 blank
Change 1