TM-9-2350-277-20-2
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6
TM-9-2350-277-20-2 - Page 61 of 783
TM 9-2350-277-20-2
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS), INCLUDING
LUBRICATION INSTRUCTIONS — Continued
0155 00
ITEM
NO.
INTERVAL
MAN-
HOUR
ITEM TO BE
CHECKED OR
SERVICED
CREWMEMBER
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE
IF:
7
Semi-annual
Track Assembly
(T150 Track Only)
NOTE
The T150 track assembly is to be
reversed semi-annually. It needs to
be reversed to put wear on the end
connectors and track shoe bushings in
both directions.
a.
The T150 track assembly needs to be
reversed to put wear on the end connectors
and track shoe bushings in both directions
(WP 0419 01). This will extend the life of
the track. If it is not reversed the track will
wear unevenly and the life of the track will
be reduced.
Any screws are
missing, loose,
or worn.
NOTE
The end connector can only be checked
with the track gauge when it is removed
from the track shoe pins.
b.
Use the track gauge on the inside or facing
side of the end connector toward the track
shoe when it is removed. The track gauge
slot is a no fit condition. If it does not fit,
the end connector is still good for use.
When the material on the end connector
gets too thin and the track gauge fits,
the end connector is bad and needs to be
replaced with a new one.
0155 00-41
Change 5
Back to Top
