TM-9-2350-277-20-2
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6
TM-9-2350-277-20-2 - Page 54 of 783
TM 9-2350-277-20-2
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS), INCLUDING
LUBRICATION INSTRUCTIONS — Continued
0155 00
ITEM
NO.
INTERVAL
MAN-
HOUR
ITEM TO BE
CHECKED OR
SERVICED
CREWMEMBER
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE
IF:
c.
If engine has been filled with preservation
oil (MIL-PRF-21260, Grade PE 30-1),
leave this oil in engine until first scheduled
oil change. Maintain operating oil level
by adding applicable grade oil (OE/HDO
or OEA). When first scheduled oil change
is made, refill engine oil with applicable
grade of oil. See Engine Lubrication Table
(Table 1, page 0155 00-16).
d.
Replace filter element each time an engine
oil change is required (
WP 0165 00
).
e.
ON CONDITION
— Drain transmission
oil.
WARNING
Hot parts can burn you. Use care when
youworknearhotpowerunit
.
NOTE
Drain oil (36 quarts) only when hot
after operation. Allow oil to drain for 1
hour if time permits.
1)
Remove access cover from bottom of
hull (WP 0450 00).
2)
Place a suitable container under
transmission drain tube.
3)
Remove plug from drain tube and drain
oil into container.
4)
Inspect plug and oil for metallic
particles. If metal chips are found,
notify direct support maintenance.
0155 00-34
Change 5
Back to Top
