TM-9-2350-277-20-2
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6
TM-9-2350-277-20-2 - Page 46 of 783
TM 9-2350-277-20-2
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS), INCLUDING
LUBRICATION INSTRUCTIONS — Continued
0155 00
ITEM
NO.
INTERVAL
MAN-
HOUR
ITEM TO BE
CHECKED OR
SERVICED
CREWMEMBER
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE
IF:
WARNING
Never perform stall check.
Transmission can be damaged.
Personnel may be injured.
a.
Immediately after road test cautiously feel
all wheel and idler hubs for noticeable
difference in temperature between hubs.
An overheated hub indicates that bearing
is out of adjustment, poorly lubricated, or
unserviceable.
A hub out of
adjustment,
poorly
lubricated, or
unservicable.
b.
Check temperature of shock absorbers.
They should feel warm. A cold shock has
failed.
Any Class III
leaks or cold
shocks.
c.
Visually check inside, outside, and
underneath carrier for any fuel, oil, or
hydraulic leaks.
3
Semi-
Annual
Idle Test
CAUTION
Avoid lengthy engine idling. This causes
coolant temperature to drop below
operating temperature and can shorten
engine life.
a.
Run engine at 800 RPM for 3-5 minutes
with range selector in 2-3 range and brakes
locked until operating temperature is
reached.
Engine runs
hot or rough.
0155 00-26
Change 5
Back to Top
