TM-9-2350-277-20-2
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6
TM-9-2350-277-20-2 - Page 76 of 783
TM 9-2350-277-20-2
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS), INCLUDING
LUBRICATION INSTRUCTIONS — Continued
0155 00
ITEM
NO.
INTERVAL
MAN-
HOUR
ITEM TO BE
CHECKED OR
SERVICED
CREWMEMBER
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE
IF:
21
Semi-
Annual
Road Wheel
Mounting Holes
a.
If road wheel mounting holes extend
beyond head of mounting nut, replace road
wheel (WP 0426 00).
Any elongated
holes that
extend beyond
mounting nuts.
22
Semi-
Annual
Torsion Bar
Anchors/Splines/
End Plugs
a.
Remove floor plates (WP 0539 00,
WP 0542 00, WP 0543 00, WP 0544 00,
andWP054500)
.
Any broken,
bent, missing,
stripped
torsion bars
or attaching
hardware.
b.
Check plugs. Be sure they are fully
seated. TIGHTEN PLUGS TO 50-75
LB-FT (68-102 N·M). Use torque wrench
(WP 0926 00, Item 79).
c.
Replace missing or damaged cotter pins
and pins or bolts from torsion bar anchors
(WP 0414 00).
0155 00-56
Change 5
Back to Top
