TM-9-2350-277-20-3
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6
TM-9-2350-277-20-3 - Page 30 of 941
TM 9-2350-277-20-3
ADJUST GENERATOR DRIVE BELT — Continued
0252 00
8.
Adjust drive belt as follows:
a.
Loosen two support screws (1) on top of generator (2).
b.
Loosen jamnut (3) and adjust turnbuckle (4) until belt is at the right tension. Tighten jamnut.
c.
TIGHTEN TWO SUPPORT SCREWS (1) TO 56-61 LB-FT (76-81 N
m) TORQUE.
FOLLOW-THROUGH STEPS
1.
Install rear power plant access panels (see your -10).
END OF TASK
0252 00-3/4 blank
Back to Top
