TM-9-2350-277-20-3
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6
TM-9-2350-277-20-3 - Page 34 of 941
TM 9-2350-277-20-3
REPLACE GENERATOR TURNBUCKLE PARTS
0254 00
THIS WORK PACKAGE COVERS:
Removal (page 0254 00-1).
Installation (page 0254 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Cotter pin
Lockwasher
Personnel Required
Unit Mechanic
References
TM 9-2350-277-10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Lower rear power plant access panel removed
(see your -10)
REMOVAL
1.
Loosen jam nut (1). Rotate turnbuckle (2) to loosen drive belt.
2.
Remove cotter pin (3) and washer (4). Discard cotter pin.
3.
Remove screw (5), washer (6), turnbuckle screw end (7), spacer (8), and washer (9) from generator (10).
4.
Remove turnbuckle screw ends (7) and (11) from turnbuckle sleeve (2).
5.
Remove pin (12), lockwasher (13), and washer (14) from bracket (15). Discard lockwasher.
0254 00-1
Back to Top
