TM-9-2350-277-20-3
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6
TM-9-2350-277-20-3 - Page 43 of 941
TM 9-2350-277-20-3
REPLACE GENERATOR/BRACKET — Continued
0255 00
NOTE
Do Step 7 and Step 8 if bracket was removed.
NOTE
Do not tighten bracket mounting screws until all mounting screws have been installed. All three
screws require a specific torque.
7.
Position bracket (1) on engine block and install screw (2) and washer (3). Align bracket holes with block holes and
install screws (5) and (6) and washers (4) and (7).
8.
Tighten screws (2), (5), and (6) to the following torque values:
Torque Values
SCREW
TORQUE
2
32-34 lb-ft (43-46 N
m)
5
36-38 lb-ft (49-52 N
m)
6
32-34 lb-ft (43-46 N
m)
0255 00-8
Back to Top
