TM-9-2350-277-20-3
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6
TM-9-2350-277-20-3 - Page 40 of 941
TM 9-2350-277-20-3
REPLACE GENERATOR/BRACKET — Continued
0255 00
NOTE
The pulley locknut must be tightened. Follow Steps 2 - 6. Performing these steps will lock the
shaft in place with no damage. After the locknut is tightened, the generator is ready to be
installed.
2.
Loop the pulley belt (1) on the bottom groove of the pulley (2)
3.
Cross the pulley belt (1) and put the other loop on the top grove of the pulley (2).
0255 00-5
Back to Top
