TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3

  TM-9-2350-277-20-3 - Page 35 of 941

TM 9-2350-277-20-3
REPLACE GENERATOR TURNBUCKLE PARTS — Continued
0254 00
INSTALLATION
1.
Install washer (14), new lockwasher (13), and pin (12) in bracket (15).
2.
Install jam nut (1) on screw end (7). Install screw ends (7) and (11) into turnbuckle sleeve (2). Center screw ends in
sleeve.
3.
Install screw end (11) on pin (12) and secure with washer (4) and new cotter pin (3).
4.
Install washer (6), screw (5), and spacer (8) in screw end (7). Install washer (9) on screw (5) and secure to generator (10).
FOLLOW-THROUGH STEPS
1.
Adjust generator drive belt (WP 0252 00).
2.
Install lower rear power plant access panel (see your -10).
END OF TASK
0254 00-2


Back to Top