TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3 - Page 303 of 941

TM 9-2350-277-20-3

REPLACE FUEL RETURN PRESSURE TRANSDUCER — Continued

0325 00

INSTALLATION

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

1.

Apply a thin coat of adhesive to threads of transducer (3).

2.

Connect transducer (3) to tee (4).

3.

Connect fuel return pressure transducer lead (1) to MSD/ICE wiring harness (2).

FOLLOW-THROUGH STEPS

1.

Lower power plant grill (WP 0464 00).

2.

Install air cleaner (WP 0168 00).

3.

Close power plant access door. See TM 9-2350-277-10.

END OF TASK

0325 00-2

Change 5