TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3 - Page 519 of 941

TM 9-2350-277-20-3

REPLACE REAR MAIN WIRING HARNESS (M577A3 ONLY) — Continued

0363 00

REMOVAL

1.

Disconnect circuit 29 lead (1) from right fuel quantity sending unit (2).

2.

Remove lockwire (3), screw (4), lockwasher (5), and ground lead (6) from sending unit (2). Discard lockwire and

lockwasher.

3.

Remove three screws (7), two lockwashers (8), ﬂat washer (9), ground lead (6), and three clamps (10), from three

weldnuts (11). Remove clamps (10) from circuit 29 lead (1). Discard lockwashers.

4.

Disconnect circuit 23 lead (12) and circuit 24 lead (13) from right tail light (14).

5.

If NBC unit is installed, disconnect circuit 415 lead (15) from NBC unit switch.

6.

Disconnect circuit 37A lead (16) from right utility outlet lead (17).

7.

Remove three screws (1), six lockwashers (3), three clamps (25) and rear main wiring harness (2) from three weldnuts.

Discard lockwashers.

0363 00-2

Change 1