TM 9-2350-277-20-3
37. Install circuit 451 lead (5) on weldnut. Secure with three screws (8), new lockwashers (9), and clamps (10).
38. Install clamp (11) on circuit 451 lead (5). Secure with screw (12) and nut (13).
39. Install clamp (11) on floor transverse beam (14). Secure with two screws (15) and nuts (16).
40. Install wiring harness (1) and bilge tube clamp (2) on weldnut (3). Secure with screw (4) and clamp (5) and new
lockwasher (6).
0362 00-32
Change 2
0362 00
REPLACE REAR MAIN WIRING HARNESS (M113A3,
M1059A3, AND
M58) — Continued