TM 9-2350-277-20-3
REPLACE PARKING BRAKE CONTROL CABLE ASSEMBLY — Continued
0411 00
0411 00-4
Change 5
9.
Remove screw (1), washer (2), clamp (3), cable (4), and two grommets (5) and (6) from carrier through power plant
front access. Have helper assist.
INSTALLATION
1.
Install grommet (7) on threaded end of cable (8). Route cable through driver’s compartment floor plate access hole.
Install grommet in access hole. Have helper assist.
2.
Install grommet (9) on cable (8). Route cable clevis (10) through hole in driver’s compartment bulkhead. Install
grommet in hole. Have helper assist.