TM 9-2350-277-20-3
REPLACE PARKING BRAKE CONTROL CABLE ASSEMBLY — Continued
0411 00
041100-5
Change 5
3.
Install jamnut (11) on cable (8).
4.
Install cable (8) in hole of lower mounting bracket (12) with jamnut (11) under lower bracket.
5.
Install second jamnut (13) on cable (8). Thread jamnut on cable until tight against lower mounting bracket (12).
6.
Install cable (1) in hole of upper mounting bracket (2).
7.
Install spring (3), third jamnut (4) and washer (5) on cable (1). Install brake stop (6) on cable end. Allow 3/4 inch (1.9
cm) minimum thread engagement into brake stop (6).
WARNING
Failure of control linkage can cause carrier to crash. Crash could kill or injure personnel.