TM-9-2350-277-20-4

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6

TM-9-2350-277-20-4 - Page 121 of 861

TM 9-2350-277-20-4

REPLACE PUSH-PULL CONTROL ASSEMBLY, BRACKET, LINKS, AND PINS

(CABLE-ACTIVATED LOCK) — Continued

0429 00

1.

Install three new spring pins (17) and (5) on bracket (6).

2.

Install spring (4) on locking pin (2).

3.

Install block (3) on locking pin (2) with new pin (1).

4.

Install links (7) to bracket (6) by aligning the center holes of the links with the uppermost holes of bracket (6) and

inserting pin (8), washers (9), and new cotter pin (10).

5.

Install push-pull control assembly (11), new lockwasher (12), and nut (13) on bracket (6).

NOTE

Washers are also used as shims to insure proper ﬁt and to center end of push-pull assembly.

6.

Install pin (14), links (7), washers (shims) (15) as needed, push-pull control assembly (11), and new cotter pin (16).

0429 00-8