TM-9-2350-277-20-4

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6

TM-9-2350-277-20-4 - Page 123 of 861

TM 9-2350-277-20-4

REPLACE PUSH-PULL CONTROL ASSEMBLY, BRACKET, LINKS, AND PINS

(CABLE-ACTIVATED LOCK) — Continued

0429 00

NOTE

Route push-pull control assembly with one end at transmission controller and other end at

steering wheel housing.

9.

Install push-pull control assembly (7) in clamp (8) and secure to hull with screw (9) and new lockwasher (10).

10. Route push-pull control assembly (7) to transmission controller (11).

11. Remove nut (12) from end of push-pull control assembly (7). Place end of push-pull control assembly (7) through hole

in bracket (13). Install new lockwasher (14) and nut (12).

12. Connect end of push-pull control assembly (7) to bracket (15) with pin (16), two washers (17) and new cotter pin (18).

0429 00-10