TM-9-2350-277-20-4

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6

TM-9-2350-277-20-4 - Page 528 of 861

TM 9-2350-277-20-4

REPLACE PERSONNEL SEATS, CUSHIONS, AND BELTS (M577A3 ONLY)

0547 00

THIS WORK PACKAGE COVERS:

Removal (page 0547 00-1).

Installation (page 0547 00-3).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0926 00, Item 65)

Materials/Parts

Cotter pin (6)

Locknut (2)

Personnel Required

Unit Mechanic

References

See your -10

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

Ramp lowered (see your -10)

REMOVAL

NOTE

There are two personnel seats in the M577A3 carriers. Remove and install both seats the same

way.

1.

Remove two cotter pins (1), four washers (2), two headed pins (3), and seat (4) from two brackets (5). Discard

cotter pins.

2.

Remove four screws (6), washers (7), and two brackets (5) from sponson.

3.

Remove two locknuts (8), washers (9), screws (10), and seatbelt (11) from seat (4). Discard locknuts.

NOTE

Remove two washers (9) on two center positions on right seat.

4.

Remove four cotter pins (12), two straight pins (13), and two legs (14) from seat (4). Discard cotter pins.

0547 00-1