TM-9-2350-277-20-4
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6
TM-9-2350-277-20-4 - Page 60 of 861
TM 9--2350--277--20--4
REVERSE T 150 T RACK DRI VE SPRO CKET AND TRACK ASSEMBLIES -- Continued
0419 01
a . (H): Not i fy dri ve r i n t ow ve hi c l e t o st op whe n se ve n t ra c k shoe s (4) ha ve pa sse d t he fi ft h roa d whe e l
(
6
position track (8) on sprockets (7). Notify driver to start vehicle engine and slowly drive forward.
b. (H): Use c rowba r t o gui de t ra c k (8) unt i l ove r i dl e r whe e l s (5). Not i fy dri ve r t o st op whe n t hre e t ra c k sh
o
re m a i n be fore
se t of roa d whe e l s (6).
FOLLOW--THROUGH STEPS
1.
Join track (see your --10).
2.
TIGHTEN TWO END CONNECTOR BOLTS (1) TO 400--430 LB--FT (529--579 N
∙
m) TORQUE.
3.
Adjust track tension (see your --10).
4.
Unblock vehicle (see your --10).
5.
Road test carrier to check that drive sprocket and carrier assembly are installed correct (see your --10).
END OF TASK
Change 2
0419 01--3/4 blank
Back to Top
