TM-9-2350-277-20-4
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6
TM-9-2350-277-20-4 - Page 63 of 861
INSTALLATION
1.
Place drive sprocket wheel assembly (1) on final drive (3). Secure with 10 new self-locking screws (2).
TIGHTEN SCREWS TO 170-190 LB-FT (231-258 N.m) TORQUE.
2.
Place track on drive sprocket wheel assemblies (1).
TM 9-2350-277-20-4
REPLACE T130 DRIVE SPROCKET WHEEL ASSEMBLY — Continued
0420 00
Change 3
FOLLOW-THROUGH STEPS
1.
Connect track and adjust tension (see your -10).
2.
Install track
cover (WP 0438 00).
3.
Unblock carrier (see your -10).
4.
Road test carrier to check that drive sprocket wheel
assembly is installed right (WP 0155 00).
END OF TASK
0420 00-2
Back to Top
