TM-9-2350-277-20-4
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6
TM-9-2350-277-20-4 - Page 54 of 861
TM 9-2350-277-20-4
REPLACE TRACK TENSION ADJUSTER AND MOUNT
0419 00
THIS WORK PACKAGE COVERS:
Removal (page 0419 00-1).
Installation (page 0419 00-3).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Torque wrench adapter (WP 0926 00, Item 4)
Torque wrench (WP 0926 00, Item 85)
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Carrier on level surface
Engine stopped (see your -10)
Carrier blocked (see your -10)
Track disconnected (see your -10)
REMOVAL
1.
Remove screw (1) and washer (2) from mount (3).
0419 00-1
Change 3
2.
Remove screw (4) and washer (5) from shaft on idler arm.
3.
Remove two screws (6) from mount (3). Loosen screw (7). Rotate mount and remove screw (7).
4.
Pull track adjuster (8) down. Remove mount (3) from adjuster.
5.
Remove adjuster (8) from shaft on idler arm.
6.
Remove grease fitting (9) and relief valve (10) from adjuster (8).
Back to Top
