TM-9-2350-277-20-5
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6
TM-9-2350-277-20-5 - Page 28 of 1047
TM 9-2350-277-20-5
REPLACE TENT AND FRAME MOUNTS (M577A3 ONLY)
0628 00
THIS WORK PACKAGE COVERS:
Removal (page 0628 00-1).
Installation (page 0628 00-3).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Torque wrench (WP 0926 00, Item 82)
Materials/Parts
Cotter Pin (2)
Locknut (4)
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
Tent frame removed from carrier (see your -10)
REMOVAL
1.
Remove two locknuts (1), eight washers (2), two screws (3), and two end fittings (4) from rear bulkhead lugs. Discard
locknuts.
2.
Remove four screws (5), washers (6), and two brackets (7) from rear bulkhead.
3.
Remove two locknuts (8), washers (9), screws (10), and retainers (11) from brackets (7). Discard locknuts.
4.
Remove two cotter pins (12), nuts (13), washers (14), hand screws (15), and clamps (16) from brackets (7). Discard
cotter pins.
NOTE
There are six quick release pins and attaching chains on the frame assembly. Remove quick
release pins and chains, as needed.
5.
Open both ends of hook (17). Remove hook from bracket on frame (18) and from chain (19).
0628 00-1
Back to Top
