TM-9-2350-277-20-5
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6
TM-9-2350-277-20-5 - Page 33 of 1047
TM 9-2350-277-20-5
REPLACE BLACKOUT CURTAIN AND FRAME (M577A3 AND M1068A3 ONLY) —
Continued
0629 00
8.
If needed, remove two eyelets (20) and washers (21) from curtain (6).
INSTALLATION
1.
If removed, place two eyelets (1) on curtain (2). Secure with two washers (3).
2.
If removed, place four buttons (4) on curtain (2). Secure with four sockets (5).
3.
Install two studs (6) on lower frame and traverse beam in driver’s compartment.
4.
If removed, install two fasteners (7) on rear bulkhead in driver’s compartment.
5.
Install new grommet (8), screw (9), two washers (10), and new locknut (11) on frame (12).
6.
Align frame (12) with bulkhead and sponson. Secure with six screws (13), twelve washers (14), and six new
locknuts (15).
7.
Install rod (16) in curtain (2).
0629 00-2
Back to Top
