TM-9-2350-277-20-5
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6
TM-9-2350-277-20-5 - Page 31 of 1047
TM 9-2350-277-20-5
REPLACE TENT AND FRAME MOUNTS (M577A3 ONLY) — Continued
0628 00
5.
Align two brackets (8) on rear bulkhead. Secure with four washers (16) and screws (17). TIGHTEN SCREWS TO 60-65
LB-FT (81-88 N
m) TORQUE.
6.
Align two end fittings (18) with rear bulkhead lugs. Secure with two screws (19), eight washers (20), and two new
locknuts (21).
FOLLOW-THROUGH STEPS
1.
Install tent frame on carrier (see your -10).
2.
Start engine (see your -10).
3.
Raise and lock ramp (see your -10).
4.
Stop engine (see your -10).
END OF TASK
0628 00-4
Back to Top
