TM 9-2350-277-20-5
REPLACE COOLANT HEATER TO ENGINE ELBOW HOSE
0715 00
THIS WORK PACKAGE COVERS:
Removal (page 0715 00-1).
Installation (page 0715 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Sealing compound (WP 0928 00, Item 56)
Personnel Required
Mechanic
Equipment Condition
Engine stopped (TM 9-2350-277-10)
Carrier blocked (TM 9-2350-277-10)
Ramp lowered (TM 9-2350-277-10)
Power plant rear access panels removed (WP 0439 00)
Power plant access door open (TM 9-2350-277-10)
Coolant heater system drained (WP 0710 00)
Air cleaner removed (WP 0168 00)
REMOVAL
1.
Loosen clamp (1) at coolant heater shutoff valve (2) and remove hose (3) and clamp (1).
2.
Loosen clamp (4) at engine elbow (5) and remove hose (3) and clamp (4).
3.
Remove adapter (6) and elbow (5) from engine block fitting (7).
071500-1
Change 5