TM 9-2350-277-20-5
REPLACE M13 NBC FILTERS AND HOSES (M1068A3 ONLY) — Continued
0789 00
INSTALLATION
1.
Install manifold (1) on sponson. Secure with two screws (2), washers (3), and new lockwashers (4).
2.
Install four heater inlet hoses (5) on manifold (1) and tighten four clamps (6).
3.
If removed, install new grommet (7) on hose (8). Route hose through hull and insert grommet in hull.
4.
Install hose (8) on manifold (1) and tighten clamp (9).
5.
Install two clamps (10) on hose (8). Secure clamps and hose to hull with two new lockwashers (31) and screws (11).
6.
Secure two fuel lines to hose (8) with new tie strap (12).
0789 00-4
Change 4