TM-9-2350-277-20-5

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6

TM-9-2350-277-20-5 - Page 721 of 1047

TM 9-2350-277-20-5

REPLACE M13 NBC HEATER HOSES (M1068A3 ONLY) — Continued

0790 00

INSTALLATION

1.

Install rear operator’s inlet hose (14) and two clamps (18) on rear operator’s heater (4) and manifold (19). Tighten

clamps.

2.

Install two clamps (17) on rear operator’s inlet hose (14). Secure clamps on sponson with two screws (15) and new

lockwashers (16).

3.

Secure electrical leads to rear operator’s inlet hose (14) with new tie straps (13).

4.

If bracket (9) was removed, install bracket on table supports with four screws (10), washers (11), and new lockwashers

(12).

5.

If either bracket (5) was removed, install bracket (5) on bracket (9) with two screws (6), washers (7), new lockwashers

(20), and nuts (8).

6.

Install rear operator’s outlet hose (2) and two clamps (1) on connector (3) and rear operator’s heater (4). Tighten clamps.

0790 00-6

Change 4