TM 9-2350-277-20-5
REPLACE M13 NBC HEATERS (M1068A3 ONLY) — Continued
0798 00
4.
Remove four screws (6), lockwashers (7), jumper (23), and heater (2) from frame (8). Discard lockwashers.
5.
Remove two adapters (9) from heater (2).
6.
Disconnect circuit lead 537B (10) from commander’s heater (11).
7.
Loosen two clamps (12) and remove inlet and outlet hoses (14) from commander’s heater (11).
8.
Remove four screws (15), lockwashers (16), and commander’s heater (11) from forward bulkhead. Discard lockwashers.
9.
Remove two adapters (17) from commander’s heater (11).
0798 00-2