TM 9-2350-277-20-5
REPLACE M13 NBC HEATERS (M1068A3 ONLY)
0798 00
THIS WORK PACKAGE COVERS:
Removal (page 0798 00-1).
Installation (page 0798 00-4).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Lockwasher (18)
Locknut (9)
Personnel Required
Unit Mechanic
References
See your -10
See TM 3-6680-316-10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Battery ground lead disconnected (WP 0338 00)
REMOVAL
1.
Disconnect circuit lead 537A (1) from driver’s heater (2).
2.
Loosen two clamps (3) and remove inlet and outlet hoses (4) and (5) from driver’s heater (2).
3.
Remove screw (19), lockwasher (20), washer (21), locknut (22), and jumper (23) from hull. Discard locknut and
lockwasher.
0798 00-1