TM 9-2350-277-20-5
REPLACE M3 NBC HEATERS AND CONTROLLERS (M1059A3 ONLY)
0797 00
THIS WORK PACKAGE COVERS:
Removal (page 0797 00-1).
Installation (page 0797 00-6).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Locknut (4)
Locknut (16)
Lockwasher (2)
Lockwasher (4)
Self-locking screw (2)
Straps (as required)
Personnel Required
Unit Mechanic
References
See your -10
TM 3-6680-316-10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Battery ground strap disconnected (WP 0337 00)
REMOVAL
1.
Loosen two clamps (1) and remove inlet hose (2) and outlet hose (3) from operator’s heater (4).
2.
Disconnect circuit 537D lead (5) from operator’s heater (4).
0797 00-1