TM 9-2350-277-20-5
REPLACE M3 NBC HEATERS AND CONTROLLERS (M113A3 AMBULANCES ONLY) —
Continued
0795 00
13. Remove four screws (21), eight washers (22), four locknuts (23), and driver’s controller (18) from bracket (24).
Discard locknuts.
14. If damaged, remove two screws (25), lockwashers (26), and bracket (24) from bulkhead. Discard lockwashers.
15. Cut tie straps (27) and remove two leads (19) from adjacent driver’s outlet hose (28). Discard tie straps.
16. Loosen clamps (29). Remove driver’s outlet hose (28) and driver’s inlet hose (30) from driver’s heater (20).
17. Remove four screws (31), eight washers (32), four locknuts (33), and driver’s heater (20) from welded mount (34).
Discard locknuts.
0795 00-3