TM 9-2350-277-20-5
REPLACE M3 NBC HEATERS AND CONTROLLERS (M1059A3 ONLY) — Continued
0797 00
INSTALLATION
1.
Install driver’s heater (1) on bracket (2). Secure with four screws (3), eight washers (4), and four new locknuts (5).
2.
Install two clamps (6) on outlet hose (7) and inlet hose (8). Install hoses on driver’s heater (1). Tighten clamps.
3.
Install driver’s controller (9) on bracket (10). Secure with four screws (11), eight washers (12), and four new locknuts
(13).
4.
Connect circuit lead 537B (14) to driver’s controller (9).
0797 00-6