TM-9-2350-277-20-5

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6

TM-9-2350-277-20-5 - Page 824 of 1047

TM 9-2350-277-20-5

REPLACE M13 NBC HEATER WIRING HARNESS (M1068A3 ONLY) — Continued

0809 00

19. Secure wiring harness (1) to commander’s heater inlet hose (2) with new tie straps (3).

20. Install clamp (4) on driver’s heater inlet hose (5) and wiring harness (1). Secure clamp with screw (6), two washers (7),

and new locknut (8) on frame (9).

21. Install circuit lead 537A (10) on driver’s heater (11).

22. Install four clamps (12) on wiring harness (1). Secure clamps with four screws (13) and new lockwashers (14) on

bulkhead weldnuts.

23. Secure cable (15) to wiring harness (1) with new tie strap (16).

24. Install wiring harness (1) on NBC control box (17).

FOLLOW-THROUGH STEPS

1.

Connect battery ground lead (WP 0338 00).

END OF TASK

0809 00-9/10 blank