TM 9-2350-277-20-5
REPLACE WATER/RATION HEATER POWER CABLE (M113A3 ONLY) — Continued
0810 00
2.
Install new grommet (3) on cable (1). Route cable into distribution box (4) and connect to circuit breaker (2). Install
grommet in distribution box .
3.
Secure cable (1) to adjacent wiring harness on driver’s bulkhead with new straps (5).
4.
Secure cable (1) to adjacent wiring harness in crew compartment with new straps (2).
5.
Remove screw (5), washer (6), radio ground lead (3), radio ground lead (4), capacitor (2), and clamp (1) from
weldnut (8).
0810 00-4