TM-9-2350-277-20-6

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 6 OF 6

TM-9-2350-277-20-6 - Page 169 of 487

TM 9-2350-277-20-6

REPLACE OUTBACK REMOTE CABLE ASSEMBLY (M1068A3 ONLY) — Continued

0847 01

WARNING

Each Outback inverter assembly weighs 70 lbs (32kg) and may be awkward to handle. Use

correct lifting procedures, indicated lifting devices, and/or assistance from other personnel to

avoid injury. Failure to comply could result in injury to personnel and equipment damage.

NOTE

Both inverters are identical, however due to space constraints, one of the inverters must

be mounted upside down.

10. Slide inverter (IN1) mount assembly (20) into housing (19). Have helper assist.

11. Install three cap screws (21), new lockwashers (22), and flat washers (23) securing the inverter (IN1) mount assembly

(20) to the inverter housing (19).

0847 01-12

Change 5